Izdelki za jeklena jekla (26223)

NLMK Europe Plate est un fournisseur historique de plaques pour l'industrie de la construction navale. Il les produit conformément aux normes nationales et internationales pertinentes (Lloyd’s Register, Bureau américain de la marine marchande, Bureau Veritas, DNV GL, RINA, Registre maritime de la Russie, ASTM A 131, etc.).

Applications des tôles en acier au carbone Les applications des tôles en acier au carbone sont très nombreuses. En voici quelques exemples : Construction : Les tôles en acier au carbone sont largement utilisées dans les grands projets de construction pour les charpentes, les ponts, etc. Industrie automobile : Elles sont utilisées dans l'industrie automobile pour les châssis et les composants de carrosserie. Industrie maritime : En raison de leur résistance à l'eau de mer, les tôles d'acier au carbone sont utilisées dans la construction navale. Centrales électriques : Les tôles en acier au carbone servent de matériaux de revêtement durables dans les centrales électriques, car elles résistent à des températures et à des pressions élevées. Avantages des tôles en acier au carbone Les tôles en acier au carbone présentent plusieurs avantages : Rentabilité Haute résistance Large éventail d'applications Contactez-nous pour vos besoins en tôle.

regeneration of surfaces and repair to different pieces of chromium-nickel steel;

We supply the European and international market with unalloyed and medium-alloyed chain steel wires from our Iserlohn-Kalthof plant in sizes ranging from 4.0 mm to 25.0 mm.

Sorte: Serie 200 300 400 500 600 Standard: JIS, AiSi, ASTM, GB, DIN, EN, AISI, ASTM, DIN, EN, GB, JIS Breite: 3 mm bis 1500 mm, kundenspezifisch Länge: Kundenspezifisch Markenname: RIGANG Technik: Warmgewalzt/Kaltgewalzt Anwendung: Bauwesen Produktname: Edelstahlband Oberfläche: BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Zertifikat: ISO, SGS, BV Lieferfähigkeit: 50000 Tonnen/Jahr Form: Edelstahlband Dicke: Kundenspezifisch Name Edelstahlband Güteklasse Hastelloy, 2205, 2507, 904L, C276, 201, 304, 304L, 316, 316L, 310s, 321, 410, 430 usw Standard JIS, AISI, ASTM, DIN, TÜV, BV, SUS usw Dicke 0,25 - 3 mm oder kundenspezifisch Breitenbereich 600 mm – 1500 mm oder kundenspezifisch Länge 2000/2438/3048 mm oder kundenspezifisch Größe 1000 mm * 2000 mm, 1219 mm * 2438 mm, 1219 mm * 3048 mm oder nach Bedarf Finish 2b, BA, Nr. 4, 8k, Haaransatz, geprägt, geätzt, Vibration, PVD-Farbbeschichtung, Titan, sandgestrahlt, Anti-Fingerabdruck

Automatische Drehteile mit rostfreier Buchse

Our metal galvanized waste containers can be specially produced in line with the technical specifications of the product. It can be produced as hot dip galvanized or original galvanized. It can be produced with and without pedal options. Apart from 770 liters, it can also be produced in 770 liters, 660 liters and 400 liters capacities.Body 1.50 mm. It is formed by bending and pressing as a single piece of sheet metal and its strength is increased. Base corners are radiused. The assembly of the body sheet and the side sheets together, the 20.00 mm. formed by pressing the sides of the side sheets. It is mounted from the outside to the body sheet with a bent protrusion or lip in width and welded completely, including the radii, without interruption.Body welding and other welds were welded without slag by gas metal arc technique.The body mouth is completely surrounded by a pipe profile. PRODUCT CODE:TK-GAL-DOMEL

The process is cnc turning. The material is stainless steel.

Aucune information supplémentaire sur ce produit. EXEMPLE DE COMMANDE:216505-3

Lien en fil d'acier plastifie 140 Référence:LA0014 État:Nouveau Colisage:5000 Epaisseur:1 Couleur:Vert Largeur:140

Advanced plastics is our core. As a family-owned business, we enable modern life and deliver pioneering products and services worldwide across all industries.

Os aros para chumbar em aço galvanizado são uma solução prática e durável para a instalação de grelhas em sistemas de drenagem. Fabricados em aço galvanizado tipo DX51D + Z275 NA, estes aros oferecem resistência à corrosão e um acabamento em zinco tipo mate que garante longevidade e estética. Com uma classe de carga A15, conforme a norma EN 124:1995, estes aros são ideais para áreas exclusivamente utilizadas por pedestres e ciclistas. Além de sua resistência, os aros para chumbar são projetados para fácil instalação e manutenção, tornando-os uma escolha prática para projetos de infraestrutura. Estes aros são perfeitos para projetos que exigem uma solução de drenagem confiável e de fácil manutenção. Com um design que prioriza a funcionalidade e a segurança, estes aros são uma adição valiosa para qualquer projeto de construção ou renovação urbana.

La reggia in acciaio viene utilizzata per assicurare i carichi pesanti tramite l'utilizzo di un sigillo e di un apparecchio pneumatico che garantisce la sicurezza per carichi di grosse dimensioni e peso. Se già utilizzate questo tipo di imballaggio contattateci per un preventivo oppure per una consulenza tecnica gratuita

En acier inoxydable 316 L - A utiliser de -40°C à +400°C - < -45°C : interdit Chaîne de levage en acier inoxydable de 0,7 t à 2,7 t Les chaînes de levage sont souvent utilisées afin de fabriquer des élingues. Pour la composition d’une élingue chaîne, il est primordial de...

PIASTRA MULTIUSO IN ACCIAIO, RIUTILIZZABILEDescrizione:Piastra in acciaio, senza cavo per tecar terapia o elettrobisturi. E' un elettrodo neutro in metallo su cui va poggiata una parte del corpo del paziente per dare conduttività all'apparecchiatura. Per collegare la piastra all'apparecchiatura è necessario avere un cavo con connettore a pinza come questo . Se non lo hai possiamo realizzarlo noi. Dimensioni: 24x16cm CLASSE CE: IIB Riferimento:EM06116G

XK-O3200 3-hole stainless steel industrial razor, rounded corners, 200 - 3 hole double edge razor Reference:6096735126133 Length (mm):44 Width/diameter (mm):22 Degree angle:0.20

Material: custom size: according to drawings Our company (Huan-Tai) is rooted in China since mid-90’s. As one of the early runners, we bring value to the table through our capabilities in engineering, quality control and schedule management that meet the high expectations of overseas customers in stability, consistency and predictability. We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Helix steel aisi Helical bar in AISI 304 stainless steel, cold drawn, with high mechanical performance, for the reinforced styling of joints and for connections, including through-holes, on masonry, reinforced concrete, arches and vaults. Suitable for the consolidation of structures in seismic areas; advantageous in combination with hydraulic binders (cement and hydraulic lime) and with resin matrix binders, it particularly facilitates the achievement of physical and mechanical performances in combination with Unisan mortar, with those of the REPAR, GROUT family and with the structural resins of the SYNTECH family. The optional accessory Connector Steel Aisi 304, supplied separately on request, allows the connection between the passing helical bar and the helical bar positioned deeply on the stripped joint. Helix Steel AISI 304 bars are available in a range of diameters: 6, 8, 10 or 12 mm, all characterised by their durability even in aggressive environments, their high tensile and shear strength, and excellent flexibility. Such characteristics make the use of these bars particularly advantageous in combination with hydraulic binders (cement, hydraulic lime), air binders (air lime) and resinous matrix binders. Flexibility, handling and versatility with various binder matrices, permit the realisation of rapid, non-invasive reinforcement operations, being easy to apply and with low installation costs. Very high mechanical physical benefits come when combined with our mortars of the REPAR, GROUT and Unisan lines and the structural resins of the SYNTECH line. Reinforcement operations on concrete and masonry structures. Reinforced pointing of joints. Structural one-sided connections or through-holes crossing the entire section. Helical morphology allows optimal gripping on bricks, mortars, stones and on old walls of historical and cultural interest generally. The durability against atmospheric and environmental conditioning makes the use of Helix Steel AISI 304 bars particularly advantageous in the structures affected by the presence of aggressive soluble salts (sulphates, nitrates, phosphates). Reinforced pointing of joints: Deep stripping of joints can ensure the placement of the bar at a depth of a few centimetres from the surface. To remove any loose and crumbly parts (stone, bricks, enticing mortar, etc.). Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Connections on masonry, concrete, arches and vaults: Make sure that there are no loose or crumbly parts on the substrate. Stripping of mortar joints. Cleaning and saturation of the substrate with pressure washing. To remove any saline efflorescence by brushing or sandblasting. Reinforced pointing of joints: Reinforced pointing of masonry joints by filling part of the joint profile with an initial layer of Unisan fibre-reinforced composite mortar (see the data sheet), then on the mortar whilst still wet, inserting the Helix Steel AISI 304 bar before covering with a final layer of Unisan mortar. Press the mortar inside the joint, being sure to press well until totally full and flush with the wall. The temperature of the substrate must be between +5° and +35° C. Connections on masonry, concrete, arches and vaults: After carefully preparing the substrate and before applying the first layer of structural mortar (lime- or cement-based depending on the type of operation), wet with water at low pressure until complete saturation, bearing in mind that a lack of saturation may prevent adhesion and cause cracking in the mortar. If necessary, apply a rough coat of Untersana mortar. Proceed with creating holes of a suitable diameter and inclination (at 45° if the operation is undertaken only on one side of the structural element). Before they are bent in anticipation of the mesh, the connectors emerge from the substrate by at least 10–15 centimetres from flush with the wall. Apply an initial coat of Unisan fibre-reinforced composite mortar (see the technical data sheet) by hand (with stainless steel trowel or putty knife) or with a plastering machine to achieve a thickness of about 1.5 centimetres, leaving the surface sufficiently rough to facilitate the adhesion of the subsequent layer. Alternatively, depending on the structural requirements, mortars of the REPAR line can be used. Place the primed alkaline-resistant fibreglass mesh of the ARMAGLASS STUCTURA line (see the technical data sheet of the selected product), placing it on the still-fresh mortar by passing the Helix Steel AISI 304 connector between the bars of the mesh. After bending the connector, restraining the mesh, apply a second finishing layer of mortar (Unisan or REPAR) at a thickness of about 1.5 centimetres. Product to be purchased as needed. Packaging: Roll of 10 meters UM: €/kg

Passende Zubehörteile erhältlich suitable accessories available Erstausrüster Qualität OEM quality Die automatisierte Herstellung garantiert eine immer wieder gleichbleibende Erstausrüster Qualität. Ideal für Ihre Serienherstellung! The automated production guarantees a constant OEM quality. Ideal for your serial production! Qualitätsprüfungen quality tests Druckprüfungen Prüfung nach R34 Maßprüfung nach VDA2 Nach Kundenwunsch pressure tests Examination according to R34 Dimensional check according to VDA2 According to customer requirements Artikelnummer / Article number:NN 01871 HxBxL / HxWxL:430 x 530 x 1460 Liter / Liters:300

Modda Suites Steel Construction Facade Construction

AUTOSOL® 3in1 FOR STAINLESS STEEL with anti-fingerprint effect! Specially developed to clean, protect and give streak-free shine to stainless steel surfaces in only one simple step. Effortlessly removes all stains such as oil, grease, fingerprints etc. Makes your equipment look like new again. Ideal for brushed metal surfaces and anodised aluminium. Item number:11 001281

ART. 530 CERNIERE PESANTI A MOLLA A SINGOLA AZIONE IN ACCIAIO Confezione:2 Dimensioni (mm):100 Pollici:4

PRÄZISIONSFLACHSTAHL MIT BEARBEITUNGSAUFMASS 1005-1030 mm TOLERANZ Dicke:+ 0,20 / 0 mm TOLERANZ Breite:+ 0,40 / 0 mm TOLERANZ Länge:+ 5 / 0 mm OBERFLÄCHE vorgeschliffen, feingefräst:N8 Ra 3,2 OBERFLÄCHE gesägt:N15 Ra 25 Anlieferzustand:weichgeglüht 745N/mm² (220HB max.) Farbcode:1.2162 BLAU Erzielbare Härte:Hrc 62

Un proceso tecnológico innovador realizado en máquinas especializadas permitió ampliar la oferta actual con productos que superan los requisitos de las normas europeas aplicables. La innovadora producción de las barras permite reducir los costes de procesamiento posterior, gracias a la mayor precisión geométrica y la superficie lista para usar. Los métodos modernos de producción y control permiten lograr características de producto significativamente mejores: Calidad de la superficie – hasta clase 4 Dimensión de la sección transversal de una barra dentro de la tolerancia supuesta – en toda su longitud Desviación de redondez – nivel máximo 0,0261 (IT / 3) Longitud precisa – tolerancia hasta 5 mm Rectitud de las barras – hasta 0,3 mm / m Sin descarburación de la superficie

Stahlwinden nach DIN 7355 und Werksnorm mit hebendem Gehäuse, zum Heben von Lasten aller Art. Lastbereich von 1,5 bis 10 t, mit Sicherheitskurbel oder Ratschenkurbel, Lastansatz auf Kopf oder Klaue. Stahl:Stahl

Finale Anprobe Material: Edelstahl AISI 316 Innensechskantdurchmesser: 24 mm Länge: 42,5 mm Außengewinde: NPTF 1/2” an einem Ende, 3/4x16UNF am anderen Ende Innendurchmesser: 9,9 mm unmarkierte Toleranz nach ISO 2768-m alle scharfen Kanten und Ecken gefast Verpackung mit Kunststoff-Schutzhüllen von Außengewinde

Services for the metalworking indrustry

The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. Speciality No additional nitrogen system necessary. tank roof:Free supported stainless steel diaphragm roof Tank wall:Carbon steel, welded Diffusers:Individual design Diameter & height:Infinitely variable from 5 m, Optimized diameter/height ratio Insulation:mineral wool 200-600mm Cladding:trapezoidal sheet metal in standard RAL color Certification:TÜV Nord EN1090 TÜV Nord DIN EN ISO 3834-2

Pallet in galvanized steel, welded. Specially developed to transport materials such as stones, marble, among others. Stackable and collapsible. Model:Special Method:Welded

Stainless Steel Casting 2 - Stainless Steel Casting